Information

• 1ST ALERT DISPATCH – Units in transit to the site.
• ARRIVAL TO SITE – Units have arrived on site.
• ONGOING - Ongoing fire with no area delimitation.
• IN RESOLUTION – Fire with no danger of spreading beyond the current perimeter.
• IN CONCLUSION – Fire extinguished, with small combustion spots within the fire perimeter.
• SURVEILLANCE – Units on site to act in case of need.
• CLOSED – Return of all involved units to the base concluded.
• pages.information.statesOfOccurrences.items.false
• pages.information.statesOfOccurrences.items.fake

• HUMAN - Firefighters, FEPC, PSP (police), Armed Forces, Emergency Medical Services, Sapadores Florestais (forest fires & rescue services), GNR (gendarmery), GIPS Grupo Intervenção de Proteção e Socorro (emergency rescue services)
• TERRESTRIAL - Road vehicles
• AIR - Helicopters / Aircrafts

The number displayed match the total number of dispatched units. This number may differ from the units on site, as some of the dispatched units may still be in transit to the operational theater

The time displayed, both on the units graph and on the fire status timeline, are the ones in which our system detected a change of data in the ANPEC website and it may not match the exact time that change occurred.

Fire risk data retrieved from IPMA (Portuguese Institute for Sea and Atmosphere).

Icons displayed with reduced opacity correspond to occurrences whose nature is:

• Fuel Management
• Burning
• Burn Prevention

• (FWI) Fire Weather Index - This is the final Canadian index system, calculated based on the sub-indexes ISI and BUI.
• (FFMC) Fine Fuel Moisture Code - This index classifies the fine fuel moisture regarding moisture percentage. It is related to the degree of flammability of the fuel located at surface level. The moisture percentage at 12 UTC for a given day, depends on the moisture percentage at the same time the precious day, 24 hours (12-12 UTC) precipitation (mm), temperature (ºC) and relative humidity (%) at 12 UTC that day. Wind speed affects only the drying speed of the material.
• (ISI) Initial Spread Index - This index classifies the inicial propagation of the fire. It depends on the sub-index FFMC and wind speed (km/h) at 12 UTC.
• (BUI) Build Up Index - The build up index, is a index of evaluation of the vegatation that is able to feed a fire ("heavy" fuel on the ground). It is calculated from two sub-indexes: DMC e DC.
• (DC) Drought Code - This index translates de moisture percentage of the húmus and medium sized firewood materials located below surface up to 8 cm. It is calculated from the precipitation for 24 hours (12-12 UTC), temperature e relative humidity at 12 UTC and DC the previous day.
• (DMC) Duff Moisture Code - This index is a good index of the effects of seasonal drought on forest fuel (húmus and large sized firewood materials), located below surface, from 8 to 20 cm deep. The index is calculated from precipitation from the previous 24 hours, temperature at 12 UTC and drought code the previous day.

Information retrieved from IPMA. (Portuguese Institute for Sea and Atmosphere).

The RCM (Risco Conjuntural e Meteorológico) combines the FWI with the territorial hazard map. It is not the FWI — it is an integrated index, computed per municipality, and the official indicator used in public alerts.

RCM is split into five classes:

• Low
• Moderate
• High
• Very High
• Maximum

Whenever this layer is active on the map, its colour legend shows in the bottom-left corner.

More info at IPMA — Rural Fire Danger.

On top of the incident icons, the main map can show several optional layers, toggled from the "Map" panel (top right). What each layer means and what the icons stand for:

Satellite hotspots (MODIS, VIIRS, IPMA FRP)

Hotspots detected from space in the last few hours. MODIS (Aqua/Terra) and VIIRS (Suomi NPP / NOAA-20) come from NASA FIRMS; "IPMA FRP" is the Fire Radiative Power product from LSA-SAF, refreshed every 15 minutes. A hotspot is not a fire confirmation — any thermal anomaly (wildfire, volcano, factory, controlled burn) can show up. Useful for spotting active fires visible from space.

Lightning strikes

Strikes detected by the IPMA network over the last 24 hours. Colour encodes amplitude polarity; size encodes the strike type.

• Negative strike (cloud-to-ground) — usually more energetic and more likely to ignite fires.
• Positive strike (cloud-to-ground).
• Intracloud strike — drawn smaller and dimmer.
• Older strikes fade out (≤1h opaque, then 1–6h, 6–12h, 12–24h progressively more transparent).

Satellite events (Gaia)

Available on the /gaia view. Red markers = active satellite-detected events; grey = inactive. Click an event to load its current footprint polygon; the "Ver evolução" button opens an animated timeline of the historical perimeter.

Animated wind

Particles drifting through the wind field forecast by IPMA's AROME model (u/v components at 10 m, current hour). The local intensity in km/h shows in the bottom-right corner while the cursor is over the map.

Point value for IPMA layers

With any IPMA forecast layer on (temperature, wind, humidity, precipitation, wind direction), clicking or tapping the map shows the layer's value at that point in the bottom-right corner. The query hits the same AROME model used to render the layer.

Information on fogos.pt is aggregated from several official sources, all publicly credited:

• ANEPC — Incident status (dispatched, ongoing, in resolution, etc.), allocated resources (personnel, ground, aerial), incident location and nature. Collected in real time via our internal backend.
• IPMA — Hourly weather forecast (AROME model for temperature, wind, humidity, precipitation), Rural Fire Danger (RCM), Canadian indices (FWI/ISI/BUI/DC/DMC/FFMC, ECMWF model), Fire Radiative Power (LSA-SAF) and lightning strikes. ipma.pt.
• NASA FIRMS — Satellite hotspots from MODIS (Aqua/Terra) and VIIRS (S-NPP, NOAA-20). firms.modaps.eosdis.nasa.gov.
• Gaia platform — Satellite-based detection and delineation of fire events, with current polygons and a historical perimeter timeline.
• Basemaps — OpenStreetMap (CC-BY-SA), Esri World Imagery / Transportation / Boundaries (satellite view), CARTO Positron (IPMA mode).

Every incident has an IPMA forecast panel for the exact fire location. Hourly weather variables (next 48 h) are fed by the AROME model. The FWI and the Canadian sub-indices are computed at 12 UTC from the ECMWF model — not from AROME. The LSA-SAF products (daily, 7 days) combine satellite observation with ECMWF forecasts. The dashed red vertical line marks the current hour.

• Temperature and humidity — air temperature at 2 m (°C, left axis) and relative humidity (%, right axis). Key dryness indicator: humidity below 30% combined with high temperatures accelerates fire spread sharply.
• Wind and gust — mean wind intensity at 10 m and peak gust (km/h). Arrows on top show direction: the arrow head points to where the wind is blowing.
• Atmospheric pressure — sea-level pressure (hPa). Sharp variations may signal an approaching or passing weather front.
• Accumulated precipitation — forecast precipitation accumulated over one hour (mm). Useful to gauge relief or worsening on the ground.
• FWI / ISI / BUI — Canadian fire weather indices, computed at 12 UTC from the ECMWF model. FWI is the final composite; ISI captures initial spread; BUI captures available fuel. Higher = more dangerous.
• DC / DMC / FFMC — fuel moisture indices. DC tracks deep fuels (long-term drought), DMC mid-layer, FFMC fine surface fuels (fast response to recent weather).
• FRM — extremes probability (%) and anomaly (%) against climatology. Flags atypical conditions for the time of year.

The RCM (Risco Conjuntural e Meteorológico) — equivalent to the Rural Fire Danger — has no dedicated chart on this page; it is shown as a layer on the main map, with its own legend.

Source: IPMA (AROME model for the hourly variables, ECMWF model for the Canadian indices, and LSA-SAF products for the daily indicators). Refreshed every model run (00 and 12 UTC).